Tecno Spark Power 2 Recovery Mode
About 2 minutes
How to enter recovery mode on Tecno Spark Power 2 ? Recovery mode offers many useful options such as reboot system, factory reset, wipe data, data recovery, etc.
your device
min 50% charged battery
two hands
How to enter recovery mode on Tecno Spark Power 2 ? Recovery Mode offers many useful options such as reboot system, factory reset, wipe data, data recovery, install software or firmware from phone memory or SD card, etc.
Please save any information you need prior to the factory reset because otherwise your personal information may not be recovered. If you have encrypted the microSD card, you must decrypt it before setting the phone. Otherwise, your phone will not be able to read the data on the card. From Settings, search for and select Decrypt SD card, and then follow the on-screen prompts.
If your Tecno Spark Power 2 smartphone has problems like:
Although using Recovery Mode does not require much knowledge and experience, your device may be permanently damaged when process goes wrong.
Tecno Spark Power 2
How To Enter Recovery Mode On Tecno Spark Power 2
Tecno Spark Power 2
You can enter the Tecno Spark Power 2 recovery mode screen for offers many useful options, following the instructions below:
Step 1
- Turn off the device.
https://www.androidsettings.net/images/recovery-mode-1.jpg
Step 2
- Press and hold Volume Up + Power buttons simultaneously till the device logo appears.
https://www.androidsettings.net/images/recovery-mode-2.jpg
Step 3
- When it logo appears, release Power button but hold the others few more seconds.
https://www.androidsettings.net/images/recovery-mode-3.jpg
Step 4
- Release all the buttons when Recovery Mode screen appears. If you see Android logo with No Command text, don't panic and just wait for a while.
https://www.androidsettings.net/images/recovery-mode-4.jpg
Step 5
- You can use the Volume Up and Volume Down buttons to scroll up or down, and the Power button to select an option.
https://www.androidsettings.net/images/recovery-mode-5.jpg
If your Tecno Spark Power 2 powers on, but won't load the operating system or only boots to the brands logo, this is a symptom of corrupted software. You'll need to perform a hard reset to have the operating system reinstalled to get your device working again.
To exit the Tecno Spark Power 2 recovery mode screen, come to Reboot System Now option and press Power button. The device will automatically reboot.
Tecno Spark Power 2